n the 15th century, navigation and mapping increased the desire for portability in timekeeping. The latitude could be measured by looking at the stars, but the only way a ship could measure its longitude was by comparing the midday (high noon) time of the local longitude to that of a European meridian (usually Paris or Greenwich)—a time kept on a shipboard clock. However, the process was notoriously unreliable until the introduction of John Harrison's marine chronometer. For that reason, most maps from the 15th century through the 19th century have precise latitudes but distorted longitudes.

The first reasonably accurate mechanical clocks measured time with simple weighted pendulums, which are unworkable when irregular movement of the fulcrum occur whether at sea or in watches. The invention of a spring mechanism was crucial for portable clocks. In Tudor England, the development of "pocket-clockes" was enabled by the development of reliable springs and escapement mechanisms, which allowed clockmakers to compress a timekeeping device into a small, portable compartment.In 1524, Peter Henlein created the first pocket watch.^[1] It is rumored that Henry VIII (the portrait of Henry VIII at this link shows the medallion thought to be the back of his watch) had a pocket clock which he kept on a chain around his neck. However, these watches only had an hour hand—a minute hand would have been useless because of the inaccuracy of the watch mechanism. Eventually, miniaturization of these spring-based designs allowed for accurate portable timepieces (marine chronometers) which worked well even at sea.

Today, the most common type of watch is the wristwatch, worn on the wrist and fastened with a watchband made of leather, nylon or other plastics (then called strap), metal links (called bracelet) or even ceramic. Before the inexpensive miniaturization that became possible in the 20th century, most watches were pocket watches, which had covers and were carried separately, often in a pocket and attached to a watch chain or fob.In the 21st century, technological advances in metallurgy, composite materials development and physical vapor deposition greatly influence watch design and manufacturing. Solid stainless steel, titanium, tungsten carbide, carbon fiber, high-tech ceramic and ion plating processes dominate a considerable market share of today's modern watch-making industry. Sapphire crystals are often incorporated to complement and enhance the durability of a quality watch.